What is Hydro-jetting?

The process of Hydro-jetting can be explained as an act of flowing a high-speed water jet in your pipe or drains remove build-up waste and blocked clogs. However, your excitement of cleaned pipes can transform into a worst nightmare for some of the days ahead if damage is done to you pipeline. That’s why it is recommended to hire professionals having decent amount of experience in practicing the technique.

Can Hydro-jetting damage your pipeline if handled incorrectly?

A good sewer company not only does its job but knows how to do it well, they take special care of the usage of technique which doesn’t unnecessarily elevates the hydro jetting cost lakewood However, any incautiously done service can cause severe damage to the pipes. The probability of the damage drastically increases when the selected hydro-jetter is way more powerful than the material of pipe, and this blunder is often committed by non-licensed amateurs. Moreover, these damages appear in the form of grooves, cracks, holes, and chipping in pipe’s interior surfaces and linings. Breath-taking moments in fear of deterioration of pipe occur when the nozzle knocks continuously along with the entropy of sediment/stones all in one place. The load on pipe surface depends on:

ЧИТАТЬ ТАКЖЕ:  Как остановить выбор на наиболее подходящей квартире?

1.Water pressure at the nozzle2.Amount of water3.Distance between nozzle and pipe wall4.Number, size, and exit angle of the nozzle points.If you’re planning to how to install septic tanks then you don’t need to worry about the damage from hydro-jetter because in septic tanks the pressure falls down due to increase in volume. Overall, Hydro-jetting is totally safe in septic tanks and is not affected by the pressure and any of the above-mentioned conditions at all.

ЧИТАТЬ ТАКЖЕ:  Родиола розовая

Do older pipes more prone to damage from Hydro-jetting?

For old and damaged pipes, Hydro-jetting may not be the best idea because it will only make the problem worse and can result into leakage into the ground. In contrast, new pipes are perfectly compatible with the Hydro-jetting method. Due to the high pressure water-jet, pipes are deeply cleansed and any build-up grease or oils are removed easily. But if you still want to have Hydro-jetting in older pipes then make sure to hire a skilled and licensed drainage specialist.

Do grease traps require Hydro-jetting?

Small grease traps less than 100 gallons doesn’t necessarily require inspection or cleaning often if the grease entering the trap is negligible. The Hydro-jetting maintenance cost varies in accordance with the grease trap installation cost and you need not to spend it if you’re practicing healthy habits to keep your kitchen drain clean.

ОСТАВЬТЕ ОТВЕТ

Пожалуйста, введите ваш комментарий!
пожалуйста, введите ваше имя здесь